A random mix from the whole library. Shuffle for a new set.
He gave the AI SSH access to his Proxmox homelab and his UniFi router and told it to run a security audit. It found a lot of holes to patch, work that would have meant juggling more than 12 terminals and containers by hand.
Smoke from his sauna stove leaked into his home studio. He asked his AI assistant to check the AirGradient sensor in Home Assistant, it told him to leave until the air improved, and it wrote a script that polls particulate levels and pings him on Telegram once it is safe.
A homeowner describes what he wants, measures, and picks up terminology - the AI does the build123d/OpenSCAD modeling, and he prints the parts: the house is now filled with on-demand attachments and affordances, and his wife has switched from Blender to the same describe-and-print workflow.
A man had a poor quality home plan from the previous owner. For about $1 of his usage quota, the AI converted the drawing into 3D, changed the room he wanted to redo, made a few visual options, built a shopping list from his local store with budgets, and put it all on a local web page. He says the same job done the normal way would take a package of apps, trained people and at least $10,000.
TP-Link has no official way for an agent to control its Tapo devices, so he took the app apart, worked out how it talks to the lights, plugs, sensors and cameras on his home network, and built a connector the AI can use. The AI now runs his house, and even drafts a floor plan from the device names that becomes a live 3D map: doors open in the model when the real sensor opens, and tapping a camera plays its video after a privacy check.
Free the AI produced an OpenSCAD file he converted to STL and 3D printed a replacement coat hanger joint in 10 minutes, part now in use.
His AI Dot, Crysta, just did most of the work renewing his driver's license. He says next year his taxes will be done by AI.
The AI created a nightstand clock app for his spare phone from a picture and a quick prompt, and the phone clock is now in daily use on his nightstand.
Spent an hour with AI migrating a Home Assistant setup to Tailscale, updating sensors and Pi-hole, and putting it all in one documented git compose file.
He bought a ratgdo control board for his garage door opener. The AI wrote and installed new firmware for it, and it can update the firmware too, so it now has full control of the opener, including the ability to disable the remotes.
Every idea is a real post from someone who tried it, summarized in our words, with a link to the original. App names are swapped for plain words.