Free the AI designed a replacement coat hanger joint he printed in 10 minutes
Free the AI produced an OpenSCAD file he converted to STL and 3D printed a replacement coat hanger joint in 10 minutes, part now in use.
A random mix from the whole library. Shuffle for a new set.
Home
Your place, your car and your pets · 265 ideasA 25 year old microscope works again after the AI built its app
His 25 year old Intel Play QX3 microscope had no software that would run on a modern Mac, and he pulled it out for his grandkids. He worked with AI in stages in one morning to build a Mac app for it, and his grandkids were soon watching a seashell through it.
The AI built my home remote in half an hour
He had wanted a small Home Assistant remote on an old M5Paper eInk module for 3 years and never built it. The AI did it in half an hour, and the remote now pulls up all his rooms and shows the sensors and buttons he tagged as Remote.
He got his dad out of a $120 parking ticket with AI
He used AI to fight a parking ticket his 82 year old dad had been given. The $120 ticket went away.
$120
Watch Autotrader and alert me to mispriced supercars
MindStudio tested an AI monitor that watches Autotrader listings and flags cars priced well under market. Scheduled checks deliver deal alerts to Telegram, and a continuity setting stops it re-alerting on the same listing.
The AI brought my old album art display back to life
His old Tuneshine display for album art sat unused because it kept losing its connection and depended on a cloud service. The AI identified the display, ran pin tests, and wrote new firmware, and now a small program on his NAS shows album art or a world clock on it.
The AI flashed his router with open firmware, running the exploit itself
The AI helped flash his router with OpenWrt, including running an exploit itself and instructing the UART steps to load the binary permanently.
Agent 'Tay' planned a birthday party in an 8-page printable plan
Her AI Tay produced an 8-page printable birthday party plan ('Shine Like a Star') with a $700 budget breakdown; she approved it and Tay set three calendar reminders.
The AI made my menu bar app. A shortcut now sets my lights.
He runs Home Assistant on an old PC and used AI to make a menu bar app for his Mac. A keyboard shortcut now sets his lights, though he says it may not work as well for homes with lots of different smart devices.
The AI designed a 3D enclosure for my radiator sensor. The button works, the fit is off.
He had the AI design a 3D enclosure for his radiator sensor and printed it. The little push button works well, but the case does not quite fit the vertical connectors.
This only partly worked. Worth knowing before you try it.
Every idea is a real post from someone who tried it, summarized in our words, with a link to the original. App names are swapped for plain words.