Shuffle again

A random mix from the whole library. Shuffle for a new set.

Home

Your place, your car and your pets · 265 ideas

Run my living-room lights and fans from an ESP32

A hobbyist says the AI assembled the firmware running his living-room lights and fans: an ESP32 web server driving a radio transmitter. It also built him a Streamlit app to explore the signals, and the code is public on GitHub.

Built a $600 family calendar display for $80

His wife wanted a Skylight wall calendar, the kind that costs about $600. He built his own for $80 on a 32 inch smart TV, with the family calendar, chores, meals, the home cameras, and voice control, and says AI did most of the building.

$520

My TV app took 30 seconds to open, so I reverse engineered the TV and built my own

His 2019 LG TV has a great screen, but the official Plex app took about 30 seconds just to show the profile picker, because it is really a web page. There is no public native toolkit for the TV, so he rooted a spare set, read the TVs own software with analysis tools and the AI, and built a native Plex client of his own. On the same TV it shows the profile picker in about 3 seconds.

The smart home app would not talk to agents, so now the AI runs my house

TP-Link has no official way for an agent to control its Tapo devices, so he took the app apart, worked out how it talks to the lights, plugs, sensors and cameras on his home network, and built a connector the AI can use. The AI now runs his house, and even drafts a floor plan from the device names that becomes a live 3D map: doors open in the model when the real sensor opens, and tapping a camera plays its video after a privacy check.

HomePartly worked

The AI designed his fan controller circuit, board, and software. The boards are ordered and still untested.

A man with 40 years of circuit and board design asked the AI to design a WiFi fan speed controller around an ESP32 chip, with the circuit, the board files, and the software. The first design took about 15 or 20 minutes. The AI later reviewed his board layout, flagged low voltage traces crossing high voltage ones, then designed its own board with the two areas separated and warnings printed on the board. He bought the parts himself. The boards are on their way and have not been powered up yet.

This only partly worked. Worth knowing before you try it.
Show 10 more

Every idea is a real post from someone who tried it, summarized in our words, with a link to the original. App names are swapped for plain words.