His corals died but the tank lights still ran a coral schedule. The AI drove a Raspberry Pi over Bluetooth, changed the light and pump schedules, and found the lights had been dimmed to about 35 percent and their clock was 6 and a half hours late, then fixed the time.
Working from a machine an agent had never run well, the AI set up his home server stack over Telegram voice messages: SSH, Docker, Traefik, certificates, split horizon DNS and local models. It also runs his house watching through Frigate and a solar dashboard he can check from his phone.
A ready made dashboard only shows what the maker thinks matters. His own status monitor, built with AI on a 10.3 inch second screen, shows him when an n8n workflow, a hoster or his lawn mower socket fails, with 53 tests included.
A user set an AI running his friend’s sprinkler system based on weather patterns, and reported big savings on the water bill. The system waters when the forecast says it matters, not on a dumb timer.
He put a camera on his rental property boiler and uses AI to read the screen and zone lights, texting him when anything goes outside normal operating parameters.
Her boiler had stopped heating the water. She sent the AI about 15 pictures step by step, followed its instructions to turn it off, switch a few handles and reset the pressure, and the boiler worked again.
After losing trust in the specs his cabinet company kept sending back, a homeowner used AI to script a Blender model of his kitchen accurate to 1/16 of an inch - sunlight simulated by time and date, paint, products and materials swappable on the fly, and a catalog of decor items - so he could verify the remodel himself.
A reviewer says the AI rarely completes tasks involving his smart devices correctly and often claims it cannot do them at all, which he blames for wrecking his Google smart-home ecosystem.
This one went wrong. See what happened before you try it.
His 25 year old Intel Play QX3 microscope had no software that would run on a modern Mac, and he pulled it out for his grandkids. He worked with AI in stages in one morning to build a Mac app for it, and his grandkids were soon watching a seashell through it.
He added a 10 foot Oogie Boogie figure next to Jack and worried strong winds would damage it. He had the AI build a script that watches wind speeds at the airport and turns off the WiFi switch running the fan when the wind passes a set limit.
His HP Color LaserJet Pro M252dw from around 2016 refused to print because its certificate had expired, and searching Google did not help. The AI talked him through the fix, then wrote a script that made a locally signed certificate, uploaded it through the printer's web page, and saved the script in his personal knowledge base, all in about 15 to 20 minutes.
A Tesla owner’s the AI took a Sentry-mode scratch incident end to end: it cut the relevant clip, identified the other car, wrote the incident report and sent the insurance claim. The whole claim package was assembled from the car’s own footage without the owner editing video or forms.
Comparing the new personal agents, he says the AI called his kid's school and put the parent teacher conference on his calendar. He still rates the AI ahead of the AI Duet for his own use.
Days earlier he set up Pi-hole on a 50 euro mini PC and it removed ads across his whole home, with Tailscale so he could carry it in his pocket. In this second part, all built in one Sunday afternoon with AI’s help, he added an app that knows when he is home without asking for his location, his own VPN using his home IP, and DNS privacy so his internet provider cannot see every site he visits.
The AI created a nightstand clock app for his spare phone from a picture and a quick prompt, and the phone clock is now in daily use on his nightstand.
He had the AI find a way into his ISP device and change its settings. The AI turned it into a wireless access point with 802.11r, added an access point section to the control panel, and turned off the old ISP's updates and telemetry.
He gave an LLM the list of boards he had, and it helped lay out the CAD and the cut list for a piece of furniture he wanted, working through OnShape's MCP. He says it got him using hand tools more this week than any week in the last year.